Krups fully automatic coffee machines have been offered in very different technical generations over many years. From older Orchestro and Siziliana machines through the Espresseria and EA80 series to Arabica, Evidence, Barista, Intuition and Sensation, the design, brewing system, grinder, water routing and electronics can differ considerably.
However, a defect does not automatically mean that the complete fully automatic coffee machine has to be replaced. Depending on the machine generation and fault, individual wear and repair parts can be replaced. At NEW-Kaffeevollautomaten you will find selected Krups fully automatic coffee machine spare parts for this purpose.
Depending on the model, our range includes components from areas such as brewing unit, seals and O-rings, grinder, pump and fluid system, hoses and connectors, valves and switches, sensors and fuses, electronics as well as various repair components.
Krups fully automatic coffee machines – two very different machine worlds
With Krups, it is particularly important to distinguish technically between older and newer fully automatic coffee machines.
Older machines such as Orchestro and Siziliana have a design that differs significantly in various areas from modern Krups EA fully automatic coffee machines.
These older machines, for example, feature classic brewing-unit and drainage-valve designs that are technically related in part to certain older AEG and Jura machine platforms.
Modern Krups fully automatic coffee machines of the EA family, on the other hand, use a different machine design with an integrated metal brewing group and Compact Thermoblock System.
A spare part must therefore never be selected solely on the basis of the Krups brand.
Krups Orchestro and Siziliana – older fully automatic machines that are still repaired
Classic older Krups fully automatic coffee machines include, for example, Orchestro 889, Orchestro 890, Orchestro 892 and Siziliana 860.
These machines have a brewing system typical of their generation, with separate mechanical components, drainage valve, water pump, grinder and various sealing points.
Even after many years of operation, such machines can still be repairable.
Typical wear areas include, for example, brewing-unit seals, drainage valve, grinder components, pump and various fluid-system components.
Do not technically compare a Krups Orchestro with a modern EA89
An older Orchestro 889 and a modern Evidence EA89 both carry the Krups brand name, but technically they are completely different machine generations.
This applies in particular to the brewing system, heating system, grinder, valve technology, electronics and maintenance concept.
When searching for spare parts, it should therefore always first be established which machine family the fully automatic coffee machine belongs to.
You can find our currently available components in the Krups spare-parts section.
Krups EA series – numerous generations and model variants
A large proportion of later Krups fully automatic coffee machines have a model designation beginning with EA.
These include, for example, machines from the EA69, EA80, EA81, EA82, EA83, EA84, EA85, EA86, EA87, EA88, EA89, EA90 and EA91 ranges.
These numbers do not simply represent different equipment variants. There can also be technical changes between generations in the grinder, pump system, electronics, milk system and other components.
A spare part for an EA8108 should therefore not be installed in an EA89 Evidence simply because both machines belong to the Krups EA family.
Arabica – compact Krups fully automatic coffee machines
Well-known Krups machines include, for example, Arabica Picto EA8108, Arabica Picto EA8105, Arabica Display EA8150 and EA8161.
These machines feature, among other things, an integrated conical grinder, the Krups Compact Thermoblock System and an internally operating metal brewing group.
The basic design therefore differs significantly from fully automatic machines from other manufacturers with a plastic brewing group that can be removed by the user.
For repairs, the Krups spare parts specifically intended for this design must therefore be used.
Krups Essential – technology of the EA81 family
The designation Essential is also used for various Krups fully automatic coffee machines.
These include, for example, machines from the EA81 range with different complete article numbers and reference versions.
The machines combine grinder, thermoblock, metal brewing chamber and pump system in a very compact design.
When searching for spare parts, therefore, not only “Essential” is relevant, but the complete product number.
Evidence – numerous variants within one product family
The Krups Evidence is one of the more extensive modern machine families.
These include, for example, models from the EA890, EA891, EA892, EA893, EA894, EA895, EA897 and EA898 ranges.
There are also versions such as Evidence Plus, Evidence One, Evidence Eco Design and Evidence Hot & Cold.
The milk system, operation, electronics and other components can differ between individual models.
The complete product reference should therefore always be used when identifying a spare part.
Krups Intuition – modern electronics and extensive functions
The Intuition series is one of the more modern Krups fully automatic coffee-machine families.
Machines such as various EA87 versions combine touch operation, stored beverage profiles and extensive beverage functions with the Krups brewing system.
As the technical equipment becomes more extensive, the number of possible components also increases: in addition to the grinder, pump and thermoblock, additional sensors, electronic assemblies, valves and milk-system components are used.
Systematic troubleshooting is therefore particularly important with modern machines.
Krups Barista EA90 – another different machine generation
The Barista series, with models such as EA9010 or EA9078, once again has different equipment and a special milk system.
On corresponding machines, for example, milk is frothed directly in the cup.
As a result, various milk and fluid components also differ from classic Arabica or Evidence machines.
A spare-parts search should therefore never be based solely on the term “Krups fully automatic coffee machine”.
Sensation – new Krups machine generation
Newer machines such as Krups Sensation and Sensation Milk further expand the model range.
They feature modern operating concepts and, depending on the version, different beverage and milk functions.
On these current machines, assemblies can differ significantly from older EA80 or EA81 models.
The same rule therefore applies here: check the complete product reference and use only clearly assigned spare parts.
Correctly reading the article number and reference number on Krups machines
Krups uses an article number or product reference to identify its machines.
A machine may, for example, be designated EA810870 and additionally carry references such as EA810870/70F or EA810870/70G.
Other series have comparable information such as EA891C10/700 or EA872B10/70A.
The part after the slash in particular may identify a specific production or variant version.
When searching for a Krups spare part, the complete designation should therefore be copied as accurately as possible.
Where is the Krups product reference located?
The product reference can be found on the rating plate or product label of the fully automatic coffee machine.
Krups itself states that, depending on the machine, the product reference can be found on the back or underside.
It is therefore worth checking the rating plate before ordering a spare part.
An exact reference is considerably more reliable than identifying a spare part solely from a product photo.
Metal brewing group – a special feature of modern Krups fully automatic coffee machines
On many modern Krups fully automatic coffee machines, the brewing unit or metal brewing group is permanently installed inside the machine.
On corresponding machines, Krups combines the brewing chamber with the Compact Thermoblock System.
This distinguishes the maintenance concept significantly from manufacturers where the user regularly removes the complete brewing group and rinses it under water.
With Krups, the integrated cleaning programme instead performs a substantial part of the internal cleaning.
Do not simply pull out the Krups brewing unit
On modern Arabica, Essential, Evidence and comparable Krups fully automatic coffee machines, the brewing group is not designed as a maintenance unit that is regularly removed by the user.
The machine should therefore not be opened merely to clean the brewing unit under water as with another manufacturer.
The designated automatic cleaning programmes should be used for regular maintenance.
A mechanical repair of the internal Krups brewing unit, on the other hand, is a technical service operation.
Older Orchestro brewing unit – different maintenance concept
The design is different on older Orchestro and Siziliana machines.
Here, various classic wear parts such as piston seals and drainage-valve components are located within the brewing mechanism.
Repairs to these machines therefore differ significantly from modern Krups EA fully automatic coffee machines.
For precisely this reason, before ordering it should be determined whether the machine is based on an older Orchestro/Siziliana platform or a more modern EA fully automatic coffee-machine platform.
Drainage valve in older Krups fully automatic coffee machines
On suitable older Krups brewing groups, a drainage valve 63577 is used.
The valve performs functions relating to water routing and pressure release during the brewing process.
If seals or mechanical components wear, water may be diverted to an unintended location.
This can become noticeable, for example, through a significantly increased amount of water in the drip tray or a reduced beverage quantity.
Jura, AEG and Krups compatibility on older machines
There are technical overlaps between various older machines from Jura, AEG and Krups.
Individual components such as certain drainage valves, seals or valve components can therefore be used across different brands.
One example is the drainage valve 63577, which can be used with corresponding older brewing-unit designs.
However, this does not mean that every Jura spare part automatically fits every Krups fully automatic coffee machine.
The technical relationship applies exclusively to specifically compatible machines and assemblies.
Repairing the drainage valve specifically
Not every case of wear necessarily requires replacement of a complete assembly.
Individual mechanical components of the drainage valve can also be relevant during a professional overhaul.
For repair businesses, for example, we offer 100 aluminium caps for the valve pin of Jura, AEG and Krups drainage valves.
Such repair solutions make it possible to continue using functional assemblies and specifically replace the component that is actually worn.
Seals and O-rings in Krups fully automatic coffee machines
Krups machines also use seals and O-rings in numerous locations.
Depending on the machine generation, they seal brewing pistons, valves, pumps, hoses, plug-in connections and other fluid-system components, for example.
Seals are wear parts. Temperature, water, mechanical movement and ageing can cause the material to become harder or damaged over time.
A small O-ring can therefore be the cause of water loss even though the adjacent larger component is still technically functioning perfectly.
Do not select Krups O-rings solely by colour
For a seal, the inside diameter, cord thickness, material and installation location are particularly important.
Two O-rings that look almost identical externally may be made from different elastomers and intended for different temperature or pressure ranges.
An O-ring should therefore not be selected solely on the basis of its colour or an approximate size comparison.
The information for the respective Krups spare part should be checked before installation.
Silicone grease for suitable Krups seals
On designated O-rings and moving sealing points, a thin lubricating film can make installation easier and reduce friction.
For this purpose, we offer our food-grade NEW-009 silicone grease in the 6 g aluminium tube.
The transparent silicone grease is suitable for designated O-rings and sealing points on fully automatic coffee machines, including corresponding applications on Krups machines.
It should only be applied in a thin layer. A damaged or hardened seal cannot be repaired with silicone grease.
Silicone grease is not suitable for every area inside a Krups machine
Silicone grease is a sealing and sliding lubricant and must not be distributed indiscriminately inside the fully automatic coffee machine.
In particular, grinding surfaces, electrical contacts, sensors and coffee-carrying areas not intended for lubrication should not be greased.
A very small amount is normally sufficient on suitable O-rings.
You can find further package sizes in our food-grade silicone grease category.
Krups grinder – fresh beans for every coffee
The grinder grinds the coffee beans immediately before preparation.
Modern Krups fully automatic coffee machines use robust grinders. Depending on the model and generation, the design and grind adjustment differ.
Consistent ground coffee is an important prerequisite for reproducible extraction.
As operating time increases, grinder components can wear. However, a changed coffee result should not automatically be interpreted as a grinder defect.
Stainless-steel conical grinders in modern Krups machines
Various modern Krups fully automatic coffee machines use conical grinders made from metal or stainless steel.
Krups uses this design, for example, in Arabica and Evidence machines.
Depending on the model, the grind can be adjusted in several stages.
This allows the particle size of the ground coffee to be adapted to the coffee beans and desired beverage.
Grind setting changes brewing resistance
A finer grind produces smaller coffee particles and can increase the resistance of the coffee puck.
If the ground coffee is too coarse, on the other hand, the water may flow through more quickly.
A coffee flow that is too slow or too fast can therefore also be caused by an unsuitable grind setting.
Before Krups grinder components are replaced, the setting, beans and other influencing factors should be taken into account.
Oily or caramelised beans can cause problems
Not every grinder problem is caused by normal wear.
Very oily, flavoured or caramelised beans may not slide through the bean container properly or can cause deposits in the grinding area.
Hard foreign objects among the coffee beans can also block or damage a grinder.
If unusual noises occur, the grinder should therefore not repeatedly be restarted without investigating the cause.
Weak coffee does not automatically mean a worn grinder
If the coffee suddenly tastes weaker, there are several possible causes.
These include grind setting, beans, selected coffee strength, actual grinding quantity, brewing system and water flow.
Only once these factors have been checked should possible wear of the Krups grinder be investigated more closely.
Targeted replacement of individual parts is more sensible than replacing a complete assembly on suspicion.
Krups water pump – water must flow reliably through the machine
The water pump transports water from the water tank through the fully automatic coffee machine.
It works together with hoses, heater, valves and brewing system.
Different pump types may be used depending on the machine generation.
A pump should therefore always be selected on the basis of the specific machine and technical version.
Older Krups machines and Invensys pump technology
Certain older fully automatic coffee machines use pump designs that are also known from machines made by other manufacturers.
Depending on the machine platform, these include Invensys or ARS pump systems, for example.
Here too, there are some overlaps between Krups, Jura, AEG, Melitta or Nivona on older technical platforms.
However, the specific machine and pump version is always decisive.
Loud pump – not automatically defective
A vibration pump sounds noticeably different when it draws in air instead of water.
A suddenly very loud pump can therefore indicate, for example, a lack of water supply or air in the system.
Other possible causes include water-tank connection, filter, limescale, blocked valves or other restrictions in the water path.
The Krups water pump should therefore not be assessed solely on the basis of its noise.
Pump runs, but no water comes out
Even an audibly operating pump does not guarantee that water can flow freely through the fully automatic coffee machine.
Possible causes include air in the system, an empty or incorrectly inserted water tank, a clogged filter, limescale or a blocked valve.
Krups also lists several of these causes in its own troubleshooting information for a lack of water flow.
During troubleshooting, the complete water path or fluid system should therefore be considered.
Krups fluid system – much more than just a pump
The fluid system comprises all water-carrying components of the fully automatic coffee machine.
Depending on the model, this includes, for example, water-tank connection, filter, pump, hoses, thermoblock, valves, brewing system, coffee outlet and milk system.
All components must work together correctly so that water reaches the right place at the right time.
Completely different faults can therefore cause similar symptoms.
Compact Thermoblock System in modern Krups machines
Many modern Krups fully automatic coffee machines use the so-called Compact Thermoblock System or CTS.
Heating and brewing functions are implemented particularly compactly within the machine.
The system enables rapid heating and is closely linked to the brewing process.
If a fault occurs in this area, it should therefore be determined precisely whether the heating system itself or, for example, water flow, sensors or electronics are actually affected.
Coffee not hot enough – several possible causes
If the coffee is suddenly cooler than usual, this does not automatically mean that the thermoblock is defective.
The temperature setting, water flow, limescale or temperature sensors can also influence the result.
In cold cups, coffee also appears to cool more quickly even though the machine is technically operating correctly.
A Krups heating or electronic component should therefore only be replaced after appropriate diagnosis.
Valves determine the water path
Modern and older fully automatic coffee machines require various valves and switches to control water, steam and pressure between different areas.
A valve can, for example, ensure that water reaches the brewing system, hot-water outlet or another functional path.
A blocked or mechanically damaged valve can therefore cause completely different symptoms.
The diagnosis should take into account during which function the problem occurs.
4-bar outlet valve for suitable Krups machines
A specific example of a valve used across different brands is the 4-bar outlet valve 66289.
This valve is used in suitable machines from different manufacturers, including Krups.
Especially on older technical machine platforms, this shows that spare parts were not always designed exclusively for a single brand.
For workshops and regularly higher demand, we offer the valve as a pack of 25 for workshops.
Why a Jura spare part can also fit older Krups machines
On older Orchestro and comparable machine platforms, spare parts are sometimes found whose article designation primarily names Jura.
This may initially appear unusual, but can be explained by structurally related assemblies.
For example, a drainage valve 63577 can be used in older Krups brewing units that are specifically suitable for it.
However, the specific compatibility remains decisive, not simply the visual similarity.
Krups milk system – from steam nozzle to One-Touch
Krups has used very different milk systems over the years.
A simpler Arabica fully automatic machine may, for example, have a conventional steam nozzle, while Evidence, Barista or other machines allow automatic milk beverages to be prepared.
Depending on the model, milk hoses, suction components, air channels, nozzles and valves are used for this purpose.
Cleaning therefore also differs from one machine generation to another.
Poor milk foam does not immediately mean a technical defect
Milk contains fat and protein. Residues can therefore accumulate particularly in small nozzles, hoses and air channels.
If the milk foam suddenly becomes worse, the milk line, air supply, nozzle and existing connecting parts should first be cleaned thoroughly.
Only once these areas are clean and correctly assembled should a valve fault or another technical problem be investigated.
You can find suitable cleaning products in our care products category for fully automatic coffee machines.
Automatic cleaning is particularly important in modern Krups machines
Because the metal brewing group in modern Krups fully automatic coffee machines is not removed for regular cleaning by the user, the automatic cleaning programme has a central function.
Depending on use and machine, the machine itself prompts the user to carry out cleaning.
A designated cleaning agent is used and the internal coffee system is automatically rinsed.
The programme should be completed fully and should not be interrupted unnecessarily.
Coffee grease and limescale are different types of contamination
When it comes to maintenance, two fundamentally different types of deposits should be distinguished.
Coffee oils and coffee fats originate from the coffee itself and are treated when cleaning the coffee system.
Limescale, on the other hand, originates from minerals in the water used and is removed by descaling.
A cleaning tablet therefore does not automatically replace a descaler, and a descaler does not replace cleaning of the coffee system.
Descaling Krups – pay attention to the machine display
For modern fully automatic machines, Krups recommends carrying out descaling when the machine or corresponding display requests it.
How quickly limescale forms depends particularly on water hardness, water consumption and filter use.
The designated descaling programme should be completed in full.
You can find suitable descaling and cleaning products in our care products section.
Water filter and Krups fully automatic coffee machine
A CLARIS filter cartridge can be used in the water tank of various Krups fully automatic coffee machines.
A water filter can reduce certain components of the water and thereby influence the limescale load, among other things.
However, the filter must be replaced regularly in accordance with the manufacturer's instructions.
Krups also points out that, on correspondingly equipped machines, the filter cartridge should be removed before descaling.
Typical fault: Krups fully automatic coffee machine loses water
Water inside or underneath the machine can have various causes.
Possible sources include the water-tank connection, pump, pressure hoses, O-rings, valves, thermoblock or brewing system.
For diagnosis, it is particularly important to observe when the water loss occurs.
Continuous water loss can indicate a different cause from a leak that occurs exclusively during the brewing process.
Typical fault: unusually large amount of water in the drip tray
Water in the drip tray is fundamentally part of normal operation of a fully automatic coffee machine.
During rinsing and certain pressure-release processes, water is deliberately routed into the tray.
It becomes noticeable when the amount changes significantly and less coffee reaches the cup at the same time.
On suitable older Orchestro machines, for example, the drainage valve or its sealing points may be relevant.
Typical fault: Krups grinds, but hardly any coffee comes out
This symptom can have several causes.
Even if the grinder can be heard operating, the brewing system, water supply, grind setting, valves or blockages may impair coffee dispensing.
Very finely ground coffee creates a higher resistance, for example.
The grinder should therefore not automatically be replaced.
Typical fault: coffee flows very slowly
Krups itself lists several possible causes for coffee flowing too slowly.
In addition to the filter and water path, a very fine grind in particular can slow down the flow.
Any change to the grind setting should be made in accordance with the instructions for the respective machine.
If the problem persists, further areas of the brewing and fluid system must be checked.
Typical fault: Krups pumps loudly and delivers hardly any water
A lack of water flow can be caused by an empty or incorrectly inserted water tank, air in the system, filter, limescale, valves or pump, among other things.
Especially after a water system has run completely dry, air may be present in the water path.
The pump should therefore not immediately be classified as defective.
A step-by-step check of the pump and fluid system helps narrow down the cause.
Typical fault: grinder runs for an unusually long time
A changed grinding duration can indicate problems with bean feed, grind setting or grinding performance.
Before a repair, it should be checked whether the beans can slide down freely and whether strongly adhesive or treated beans are being used.
Foreign objects can also interfere with a grinder.
Only then should the condition of the grinder components be assessed.
Typical fault: Krups coffee is too weak
Weak coffee can be caused by too little coffee, a grind that is too coarse or the beans being used.
A technical problem in the grinding or brewing system may also play a role.
For weak coffee, Krups recommends checking the coffee beans and grind setting, among other things.
A spare part should therefore only be ordered once an actual mechanical fault can be identified.
Typical fault: no milk foam
If coffee preparation works but the milk system no longer functions correctly, troubleshooting can already be narrowed down to a smaller area.
The milk hose, milk nozzle, air supply, connections and cleaning condition should be checked in particular.
With automatic milk systems, valves or other internal components may also be involved.
However, thorough cleaning should always take place before unnecessary replacement of parts.
Typical fault: unusual noises inside the machine
The noise itself can provide an important indication of which assembly is affected.
A grinder produces a completely different sound from a dry-running water pump or a mechanically stressed brewing unit.
It is therefore helpful to observe during which phase of the programme the noise occurs.
If it occurs directly during grinding, the problem is more likely to be in the grinding area. If it only occurs during water delivery, the fluid system should be checked.
Krups sensors and fuses
In addition to purely mechanical components, a modern fully automatic coffee machine has various sensors and fuses.
They monitor temperature, positions or other operating conditions, for example.
A sensor fault can therefore result in an otherwise functional assembly not being controlled correctly.
Depending on the fault, its electrical control should therefore also be taken into account before an expensive mechanical component is replaced.
Krups electronics – particularly important in modern machines
As equipment becomes more extensive, the importance of the electronics increases.
Touch display, beverage memory, temperature control, pump control and sensors are coordinated by electronic assemblies.
An electrical fault can therefore produce symptoms similar to a mechanical defect.
Work on electronics and mains voltage should be carried out exclusively by appropriately qualified persons.
Repair instead of unnecessarily replacing functional assemblies
An economical repair begins with the most precise possible fault diagnosis.
If, for example, only a seal is leaking, the complete adjacent component does not necessarily have to be replaced.
Individual repair components can also be relevant for older drainage valves.
One example is our aluminium cap for the valve pin of suitable Krups drainage valves.
Such solutions are part of our approach to enable targeted repairs of suitable assemblies instead of unnecessary complete replacements.
Repairing older Krups fully automatic coffee machines – is it worthwhile?
The age of a fully automatic coffee machine alone does not determine whether a repair makes sense.
Older Orchestro machines in particular may still be repairable if the fault is manageable.
If, for example, only a seal, drainage valve or another individual component is affected, the repair effort may be significantly lower than replacing the complete machine.
The overall condition, spare-part availability and type of fault are decisive.
Diagnosing modern Krups EA machines specifically
On modern Krups machines, troubleshooting should be adapted to their technical concept.
The integrated metal brewing group, automatic cleaning and compact thermoblock design differ significantly from older Orchestro machines.
An EA89 Evidence therefore requires, for example, a completely different repair strategy from an Orchestro 889.
The exact product reference is an important basis for this.
Maintenance can prevent repairs – but cannot repair a defect
Regular cleaning and descaling can reduce deposits and support the intended function of the machine.
However, a damaged O-ring, worn pump or mechanically defective valve will not become functional again as a result.
Conversely, a spare part should not be ordered immediately if a cleaning or descaling problem may first be present.
Maintenance and repair therefore fulfil different but related tasks.
Food-grade silicone grease as a workshop aid
For suitable repairs, food-grade silicone grease is one of the typical aids.
It can be used as an assembly and sliding lubricant on designated O-rings and sealing points.
Our compact 6 g aluminium tube is particularly economical because only a very thin film of grease is normally required for a seal.
For workshops with regularly higher demand, we also offer the 100 g tube of food-grade silicone grease.
Krups spare parts for professional repair businesses
Krups fully automatic coffee machines are repaired by both private customers and professional workshops.
With regular servicing, seals, valve components, pump parts and other wear parts in particular may be required more frequently.
For corresponding requirements, we offer larger packaging units for various products.
One example is the set of 25 4-bar outlet valves 66289.
You can find further workshop quantities in our bulk discount category.
100 aluminium caps for drainage valves as a workshop quantity
For businesses that regularly overhaul older Krups, AEG and Jura brewing units, we also offer 100 aluminium caps for the valve pin of drainage valves.
This large pack, which is specifically intended for one repair area, is particularly suitable for repair businesses and spare-parts dealers.
At the same time, it shows that the complete drainage valve does not always have to be replaced on corresponding older assemblies.
Why Krups spare parts are sometimes listed for several brands
Components were sometimes used across several brands, particularly on older machine platforms.
Individual products can therefore be compatible with Krups, Jura, AEG, Melitta, Nivona, Bosch or Siemens at the same time.
This does not mean that the machines as a whole are identical.
It merely means that a specific component may be technically identical or suitable for several specifically listed applications.
Never buy spare parts solely on the basis of a product photo
Many pumps, valves, O-rings and other components look very similar at first glance.
Technically, however, there may be differences in dimensions, electrical power, connections, valve function or material.
A spare part should therefore be selected on the basis of the product reference, existing part number, design and compatibility information.
A visual comparison alone is often not sufficient for a reliable repair.
Safety when repairing a Krups fully automatic coffee machine
A fully automatic coffee machine operates simultaneously with mains voltage, hot water, heating systems, pressure and moving mechanical components.
Before opening the machine, it must be completely disconnected from the mains supply.
Hot components should be allowed to cool sufficiently and any existing pressure must be able to dissipate.
Work on electronics, mains voltage and safety-relevant components should be carried out exclusively by persons with the appropriate specialist knowledge.
How to find the correct Krups spare part
1. Determine the machine family
First check whether the machine is, for example, an older Orchestro or Siziliana, an EA80/EA81 fully automatic machine, Arabica, Evidence, Barista, Intuition or Sensation.
2. Read the complete product reference
Read the product or article number from the rating plate and, wherever possible, also take the reference after the slash into account.
3. Narrow down the fault area
Wherever possible, distinguish between brewing unit, grinder, water pump, fluid system, valve, heating system, milk system, sensors and electronics.
4. Check the existing component
Check existing part numbers, design, connections and, where applicable, electrical specifications.
5. Observe the product description and compatibility
A component should only be used if the machine or assembly compatibility can be clearly established.
Frequently asked questions about Krups fully automatic coffee machine spare parts
Which Krups spare parts are available from NEW-Kaffeevollautomaten?
Depending on the model, you can find brewing-unit components, seals, electronics, grinder parts, pump and fluid-system parts, repair parts, hoses, connectors, sensors, fuses as well as valves and switches in our range.
What does EA mean on Krups fully automatic coffee machines?
EA is part of the product designation of numerous Krups fully automatic coffee machines. The following numbers and letters identify the specific machine version. The complete product reference should therefore always be used for spare parts.
Where can I find the Krups article number?
Depending on the model, the product reference is located on the back or underside of the machine. It should be read in full, including any reference information.
Can I remove the brewing unit from my Krups EA8108?
The metal brewing group of modern Krups EA fully automatic coffee machines is not designed as a cleaning unit that is regularly removed by the user. For normal maintenance, the machine uses automatic cleaning programmes.
Why is the Krups brewing unit made of metal?
Krups uses an integrated metal brewing group in combination with the Compact Thermoblock System in various modern fully automatic coffee machines. This design principle differs from removable brewing groups from other manufacturers.
Can a Krups Orchestro brewing unit be repaired?
On suitable older Orchestro machines, various wear and repair parts of the brewing mechanism can be replaced. These may include seals and drainage-valve components, for example.
Which drainage valve fits older Krups machines?
On corresponding older machine platforms, for example, the drainage valve 63577 can be used. The specific machine compatibility must be checked before ordering.
Why are some Krups spare parts also offered for Jura and AEG?
Certain older machine platforms use technically identical or compatible components. This applies, for example, to individual drainage-valve, sealing or fluid components. However, there is no general compatibility between all machines from these brands.
Can I lubricate Krups O-rings with silicone grease?
At designated sealing and sliding points, suitable food-grade silicone grease can be applied in a thin layer. A damaged seal must nevertheless be replaced.
Why has my Krups water pump suddenly become very loud?
Possible causes include air in the system, a lack of water supply, filter, limescale, a blocked water path or the pump itself. The complete water system should therefore be checked first.
Why is my Krups pumping but no water comes out?
In addition to a pump fault, possible causes include air, the water tank, water filter, limescale, valves or a blockage in the fluid system.
Why does the coffee only come out drop by drop?
A grind that is too fine can increase brewing resistance. The filter, water path, brewing system or limescale may also be involved. The cause should therefore be narrowed down systematically.
Why is my Krups coffee too weak?
In addition to possible grinder wear, the beans, grind setting, coffee quantity and other settings can influence the flavour. A technical defect should only be assumed after these factors have been checked.
How is a modern Krups fully automatic coffee machine cleaned?
Many current and more recent Krups EA machines have automatic cleaning programmes for the internal coffee system. The machine prompts the user to carry out cleaning at the designated time. The exact procedure depends on the respective product reference and operating instructions.
When does a Krups fully automatic coffee machine need to be descaled?
This depends particularly on water hardness, water consumption and filter use. On modern machines, descaling should be carried out when the fully automatic coffee machine requests it.
Is water in the Krups drip tray normal?
Yes. Rinsing and pressure-release processes can deliberately route water into the drip tray. A technical inspection is particularly useful if the amount increases significantly compared with previous behaviour or less coffee is dispensed at the same time.
Can a 4-bar outlet valve be used in Krups machines?
Yes, on machines suitable for it. For workshops, for example, we offer the 4-bar outlet valve 66289 in a pack of 25. The specific machine allocation must be taken into account.
Is it still worth repairing an old Krups Orchestro?
This depends on the overall condition and fault. For individual wear parts such as seals, the drainage valve or fluid-system components, targeted repair can also make sense on older machines.
Are Krups spare parts available for repair businesses?
Yes. In addition to individual products, we offer selected bulk quantities such as 25 outlet valves 66289 or 100 aluminium caps for drainage valves.
Where can I find spare parts for my Krups fully automatic coffee machine?
All currently available components can be found in our Krups fully automatic coffee machine spare-parts category.
Krups fully automatic coffee machine spare parts at NEW-Kaffeevollautomaten
Krups fully automatic coffee machines include very different machine generations. An older Orchestro or Siziliana has a different technical basis from Arabica, Essential, Evidence, Barista, Intuition or Sensation.
At NEW-Kaffeevollautomaten you will find Krups fully automatic coffee machine spare parts for various repair areas and machine generations.
Depending on the model, these include brewing-unit and repair parts, seals and O-rings, grinder parts, pumps and fluid-system components, hoses and connectors, valves, sensors and electronics.
For suitable older brewing-unit designs, for example, you will find the drainage valve 63577 as well as aluminium caps for drainage valves for professional repairs.
For maintenance and assembly work on suitable seals, we also offer our food-grade NEW-009 silicone grease.
Workshops and regularly ordering customers can find further larger packaging units in our bulk discount category.
For successful spare-part identification with Krups, the following is particularly important: distinguish the machine generation, read the complete article or product reference, narrow down the fault area and then check the specific compatibility of the spare part.
All products currently available can be found directly in our Krups fully automatic coffee machine spare-parts category.
